Standalone Engine Management SEM201 Based on MS3x

Standalone Engine Management SEM201 Based on MS3x

review
0
0
5
Your Price: $200.00
In Stock.
Part Number:SEM201

Choose Options

PCB additional parts help
PCB only
+Connectors plus pins [+$15.00]
+aluminum Enclosure [+$15.00]
+Harness [+$20.00]
+Bluetooth [+$20.00]
SD card slot [+$15.00]
Real time clock [+$5.00]
One channel programmable knocking [+$10.00]
Standalone engine management system based on Megasquirt MS3x Processor and firmware with enhanced inputs and output ports. It is capable of controlling sequential injection on engines up to 8 cylinders, or semi-sequential up to 16 cylinders, combined with direct fire ignition for engines up to 8 cylinders or wasted spark ignition on engines up to 16 cylinders. Can be connected as fully standalone ECU or as piggyback and share the sensor reading with the stock ECU as it has differential trigger inputs, The 4 bar internal MAP sensor can read up to 44psi of boost, Programmable knocking detector circuit can be used to adjust the ignition timing,  5V ref voltage, and internal switch to pull up resistor. The CAN bus facilitate the communication with SPTRONICS O2 sensor wideband controller and EGT amplifier for more accurate reading. It has dedicated inputs (Crank, CAM, CLT, IAT, MAP, TPS, O2 and knocking) and 9 low side outputs to drive injectors or any solenoid valve. 2 dedicated ignition outputs and 6 ignition outputs shared with inputs.. It comes with 1.5 meter harness and USB cable. Bluetooth connectivity, SD card loggin, RTC.

Related Items